Table of Contents
Advertisement
3. Maintenance
This chapter deals with the basic maintenance that an operator can apply to the
HST-X04 scanner. The maintenance operations explained as follows helps keep the
product in good physical and working condition. Due to its design, the HST-X04
scanner requires only a minimum of maintenance. This chapter covers preventive
maintenance and unit cleaning.
3.1
Preventive Maintenance
The HST-X04 does not require preventive maintenance. Only a regular inspection of
the product is recommended to ensure that the HST-X04 scanner functions correctly.
3.2
Unit Cleaning
The HST-X04 scanner external surfaces can be cleaned when needed. This section
provides the procedure for the appropriate cleaning of the product.
To clean the unit
1.
Disconnect and remove all cables, probes, and wedges.
2.
To bring the instrument back to its original finish, clean the housing with a soft
cloth.
3.
To remove persistent stains, use a damp cloth with a soft, soapy solution. Do not
use abrasive products or powerful solvents that could damage the finish.
DMTA020-01EN, Rev. C, March 2014
Maintenance
21
Advertisement
Chapters
Table of Contents
