Handset Registration - Avaya MDW 9040 Quick Reference Manual

Handset Registration

STEP 1: Press the Handset
Registration activation button on
the Dual Radio Module
corresponding to the Line (1 or 2) to
which the handset will be
registered. The corresponding radio
module LED (Power LED for Line 1,
or Control LED for Line 2) will flash
to indicate that it is ready for
handset registration.
NOTE: There is a 5 minute time
limit to complete the registration.
STEP 2: At the handset, press
Menu and then press
the arrow appears to the right of
Configuration, then press the
Softkey (
STEP 3: At the Configuration
menu, press
appears to the right of
Registration, then press the
Softkey (
STEP 4: For single zone operation,
move the arrow to Zone 1, then
press the Softkey (
Reg to complete the registration.
STEP 5: For dual zone operation,
repeat Steps 1 - 3, then register the
handset to the Zone 2 radio module.
NOTE: When registration is complete,
the LED should stop flashing.
) below Sel.
until the arrow
) below Sel.
2
until
) below