Remote Access - Motorola O2 Manual

3. Display shows
cancel.
n
4. Press to return to standby.
Notes
If the memory is within 10 seconds of becoming full while a caller is leaving a
message, they will hear, "Please complete your message within 10 seconds".
If they are still talking when the memory becomes full the caller hears, "Thank
you for calling", and the machine will hang up.
When the memory is full, the OGM will automatically be set to
must delete old messages before the O2 can record new messages.
11.14

Remote access

Remote access allows you to operate your answering machine and listen to
your messages by calling the O2 from another phone.
The default setting is On.
1. Call your O2. When you hear the OGM, press *.
2. Enter your 4 digit remote access PIN (default setting = 0000). You will hear
a confirmation beep.
Note
You should change this code for additional security, see "To change the remote
access PIN".
3. Use the following keys to operate your answering machine:
DTMF
code
with Voice Prompts
*
To enter remote access mode
1
To hear main menu
2 To play all messages
3 To play new messages
4 To skip back during
messages
5
To delete during messages
6 To skip forward during
messages
7 To set answer mode
8 To record a new OGM
9 To switch answer machine
off
0 To switch answer machine on To switch answer machine on
Answering machine
Delete All Old Messages
?. Press to confirm or
Yes
Operations
with Outgoing Messages
To enter remote access mode
No action
To play all messages
To play new messages
To skip back during messages
To delete during messages
To skip forward during
messages
No action
No action
To switch answer machine off
to
No
Only. You
Answer
45