3.7
Call from the Calls Lists
Note
You need to subscribe to your network's Call Display service to be able to see
the caller's number in the Calls Lists.
1.
Press Menu, the display shows
2. Scroll
or
U
D
Calls) you want.
Calls,
Delete
3. Press Select..
4. Scroll
or
U
D
t
5. Press
to dial the number.
3.8
To answer a call
When you receive an external call, the phone rings and
the display.
t
1.
Press
to answer the call.
Note
If when the handset is on the charger you would like to simply lift the handset
to answer the call you will need to switch Auto Talk on, see page 33.
3.9
To answer a call in hands-free
If the handset is off the charger or auto answer is switched off, press
to answer the call.
If the handset is on the charger and auto answer is switched on, lift the handset
t
and press
.
Important
When the phone is ringing, avoid holding the earpiece too close to your ear as
it may damage your hearing. Hands-free activation can suddenly increase the
volume in the earpiece to a very high level. Make sure the handset is not too
close to your ear.
Note
To switch back to earpiece mode, press
3.10
To adjust the volume
1.
During a call, press
The level is shown in the handset display.
3.11
Secrecy
Mute the microphone so that you can talk to someone else in the room without
your caller hearing you.
1.
During a call, press
caller cannot hear you.
2. Press
to return to your caller.
Off
Using the phone
Calls Lists
to highlight the calls list
to the entry you want.
or
to adjust the earpiece or loudspeaker volume.
U
D
or OK. The display shows
Secrec.
and press Select.
(Missed
Calls,
Received
External Call
t
again during the call.
Secrecy On
Calls,
Dialled
shows on
t
twice
and your
17