Table of Contents
Advertisement
Q
P
Table 3. Front Controls and Indicators
Item
Feature
Front Panel
A.
Power switch
B.
Reset switch
C.
NMI switch
D.
Power LED (green)
E.
Power fault LED (yellow)
F.
Cooling fault LED (yellow)
G.
Drive fault LED (yellow)
H.
Front panel LCD
A
B
C
D E F G
O
N
M L
K J I
Figure 10. Front Controls and Indicators
Description
When pressed, it turns on or off the server. The +5 V standby voltage
is ON whenever the server is plugged in.
When pressed, it resets the server and causes the power-on self test
(POST) to run.
When pressed, it causes a nonmaskable interrupt. This switch is
recessed behind the front panel to prevent inadvertent activation. It
must be pressed with a narrow tool (not supplied).
When lit continuously, it indicates the presence of DC power in the
server. When not lit, it indicates power is turned off or power source is
disrupted.
When lit continuously, it indicates a power supply failure.
When flashing, it indicates a fan failure.
When lit continuously, it indicates an asserted fault status on one or
more hard disk drives in the hot-docking bay. When flashing, it
indicates drive reset in progress.
Displays information about processor type and failure codes.
H
OM07301
OCPRF100 MP Server System 17
continued
Advertisement
Table of Contents
