Table of Contents
Advertisement
Rackmount Installation
2-2
Spring-loaded retaining locks
Figure 2-1
Power Supply Installation
The VSU-7500 ships with a VSU rackmount bracket kit, which includes two
L-shaped brackets that attach to the sides of the VSU-7500 and to the front of a
standard 19-inch equipment rack. Referring to Figure 2-2, perform the following
procedure to install the VSU-7500 to a standard 19-inch equipment rack:
From one side of the VSU-7500, remove the two front side screws.
1.
Using the flat-head screws, provided with the bracket, attach the bracket to
2.
the VSU-7500.
Repeat previous steps to attach the bracket on the other side of the VSU-7500.
3.
Install the VSU-7500 into a standard 19-inch rack, using screws that fit the
4.
rack (not provided).
Slide the power supply into its slot and press
until the spring-loaded lock snaps
VSU-7500 User Guide
Installing the VSU-7500
Advertisement
Table of Contents
