Memory; Table 4. Memory Configuration Table - Intel S1200BT Service Manual

Except for these two processors, the Intel
®
Intel Xeon
in FC-LGA 1155 socket package with 5GT/s point-to-point DMI interface to PCH and
LGA 1155 pin socket. For a complete list of supported processors, see the links under
"Additional Information and

Memory

The Intel
subsystem and up to two DIMM sockets per channel.
See the following figure for channel slot configuration. The minimal memory population
is one DIMM in memory slot DIMM_A1. For a complete list of supported memory, see
the links under
Configuration
1 DIMM Single A1 only Single
Channel Channel
1 DIMM Single
Channel
2 DIMMs Single A1 Single Channel
Channel
2 DIMMs Single
Channel
2 DIMMs Dual A1 Dual Channel
Channel Symmetric
Symmetric
®
3 DIMMs Intel A1 Dual Channel
Flex Memory Symmetric
®
3 DIMMs Intel A1 Dual Channel
Flex Memory Symmetric
4 DIMMs Dual A1 Dual Channel
Channel Symmetric
Symmetric
The Independent Channel Mode is the default Maximum Performance Mode preferred for
®
Intel Xeon
populated in any order and have no matching requirements. All channels must run at the
same interface frequency, but individual channels may run at different DIMM timings
(RAS latency, CAS latency, and so on).
14
®
E3-1200 V2 Processors or the 3
Software".
®
Server Board S1200BT supports a DDR3-based ECC UDIMM memory
"Additional Information and Software"

Table 4. Memory Configuration Table.

DIMM_A1
A2 Single Channel
A2 Dual Channel
Symmetric
A2 Dual Channel
Symmetric
®
Processor E3-1200 Series based platforms. All two channels may be
®
Server Board S1200BT also supports the
rd
Generation Intel
DIMM_A2 DIMM_B1
B1 only Single
Channel
B1 Single Channel
B1 Dual Channel
Symmetric
B1 Dual Channel
Symmetric
B1 Dual Channel
Symmetric
B1 Dual Channel
Symmetric
®
Core™ i3 Processors
DIMM_B2
B2 Single Channel
B2 Dual Channel
Symmetric
B2 Dual Channel
Symmetric
Intel® Server Board S1200BT Service Guide