Figure 8. Intel ® Sas Entry Raid Module - Intel S1200BT Service Manual

Feature
On-board Hard Support for six Serial ATA II hard drives
Drive through six onboard SATA II connectors with
SW RAID 0, 1, 5, and 10.
RAID Support
LAN One Gigabit Ethernet device 82574L connect
to PCI-E x1 interfaces on the PCH
One Gigabit Ethernet PHY 82579 connected
to PCH through PCI-E x 1 interface
Server Onboard LLC Pilot III Controller (iBMC)
Management
Optional Intel
4 (RMM4) lite and optional dedicated
NIC module
Security TPM module connector
Intel® Server Board S1200BT Service Guide
Description of S1200BTL
•
Up to four SAS hard drives through option
®
Intel SAS Entry RAID Module card
•
Two 6Gb/s SATA ports and four 3Gb/s
SATA ports
• ®
Intel Embedded Server RAID
Technology II through onboard SATA
connectors provides SATA RAID 0, 1, and
10 and optional RAID 5 support provided
®
by the Intel RAID Activation Key
AXXRAKSW5
• ®
Intel Rapid Storage RAID through
onboard SATA connectors provides SATA
RAID 0, 1, 5, and 10
•
One optional internal SAS module
connector which supports
AXXRMS2AF040, AXXRMS2LL040, and
AXX4SASMOD
•
Integrated Baseboard Management
Controller (Integrated BMC), IPMI 2.0
compliant
•
Integrated 2D video controller on
PCI-E x 1
®
Remote Management Module
Description of S1200BTS
Support for six Serial ATA II hard drives
through six onboard SATA II connectors
with SW RAID 0, 1, 5, and 10.
Six 3Gb/s SATA ports
• ®
Intel Embedded Server RAID
Technology II through onboard SATA
connectors provides SATA RAID 0, 1,
and 10 and optional RAID 5 support
provided by the Intel
Activation Key AXXRAKSW5
• ®
Intel Rapid Storage RAID through
onboard SATA connectors provides
SATA RAID 0, 1, 5, and 10
One Gigabit Ethernet device 82574L
connect to PCI-E x 1 interfaces on
the PCH
One Gigabit Ethernet PHY 82579
connected to PCH through PCI-E x 1
interface
—
TPM module connector
®
RAID
5