Advertisement
If the camera is managed by FLIR's Latitude VMS or is on a network with static IP
addressing, you can manually specify the camera's IP address using the DNA tool
or the camera's web page. The camera's default IP address is 192.168.0.250.
To manually specify the camera's IP address using the DNA tool:
a. Run the DNA tool (DNA.exe) by double-clicking
The Discover List
appears, showing
compatible
devices on the
LAN segment and
their current IP
addresses.
In the DNA Discover List, verify that the camera's status is Online.
If this is the first time you are configuring the camera or if it is the first time after
resetting the camera to its factory defaults, DNA automatically authenticates
the camera with the default password for the camera's admin user (admin).
If the admin user password has been
changed, you need to authenticate the
camera.
In the DNA Discover List, right-click the
camera and select Login.
In the DNA - Login window, type the
password for the admin user. If you do
not know the admin user password,
contact the person who configured the
camera's users and passwords.
Click Login, wait for
appear, and then click Close.
In the DNA Discover List, verify that the camera's status is Authenticated.
b. Change the camera's IP address.
Right-click the camera and select IP Setup.
Elara FR-345-EST QIG Rev 110
Ok status to
This document does not contain any export-controlled information.
.
December 2020
Advertisement
