Download From Tachograph - inelo TachoReader Mobile II Manual

Tacho USB Transmission cable

4.3. Download from tachograph

Requirements for a data download from digital tachograph
USB transmission cable,
·
laptop with installed software TachoScan,
·
company card.
·
Download procedure
1. Turn the vehicle key in the position II (ignition)
board flash (tachograph activation).
We recommend to perform these operation together with the driver.
2. Insert the company card into the slot No.
3
. The tachograph detects the card. Confirm the checkback "Company lock yes/no".
4
. Connect your PC to the tachograph using the USB transmission cable.
Position of the interface within the tachograph - see tachograph manual.
5 L
. aunch TachoScan.
Read digital tachograph
select:
·
a configuration window pops up. Press the button
·
You can change the settings in the configuration dialog (see "
Configuration
" ") before the download.
the TachoScan starts the download.
·
Download in progress
If the window "
setting is false (see "
itself is not plugged correctly.
Depending on the data volume the download can take up to about
6 A
. fter the download is completed you will see the window "
data Help file for TachoScan
" (see
"
1
;
" does not appear or pops off you can assume that the COM port
USB Transmission cable
" -
").
–
the control lamps on the instrument
2
or No. .
[OK]
within this window,
USB Transmission cable
Configuration
" ") or the USB transmission cable
>
1 hour time
" -
>
.
General and technical
40