Configuration Directly In The Device; Download From Tachograph - inelo TachoReader Combo Plus Manual

TachoReader Combo Plus
To confirm the configuration changes, click

2.5.1. Configuration directly in the device

To perform configuration directly in the device:
1. Connect the device to a computer - select:
configuration" window (więcej w temacie: "Configuration").
2. Connect
TachoReader Combo Plus
1. Setting the range of days to download:
below the progress bar there are numbers indicating the range of days to download (e.g.,
·
- the last seven days,
to change the range of days to download, press the:
·
respective number of days lights up;
downloading is started by pressing:
·
2. Direct configuration also allows to download data from a driver card inserted in the
tachograph (see:

2.6. Download from tachograph

Operations after connecting to a computer:
1. Open the TR Combo Plus configuration window, and then, to configure button:
select the type and scope of activities to be downloaded from the tachograph (see:
"Configuration" topic for more).
If you are not sure what to choose, click:
2. If you want to control the scope of the downloaded data directly on the device,
Select day range using this button
topic for more).
Select day range using this button
to the tachograph using a Tacho-Combo cable.
6
0 - the last sixty days, etc.);
"Download from driver card inserted in the tachograph
.
button.
.
option (see: "Configuration directly in the device
option in the "device
L
button until the ED on the
" topic for more).
18
,
check
the:
7
or
"
14
14