inelo TachoReader Mobile II Manual page 11

TachoReader Mobile II
Make sure that the "Driver card download via tachograph" option in the configuration window
of TachoReader Mobile II device is
Operations on the vehicle
1. Turn the vehicle key in the position II (ignition)
board flash (tachograph activation).
It is recommended to perform this step together with the driver.
2. Insert the company card into slot
3 A
. fter reading the card in the tachograph confirm the message: "
4
. Insert driver card from which data is to be retrieved into a free slot in the tachograph.
5 A z
. fter recogni ing the card by the tachograph, connect the TachoReader Mobile II device to
the tachograph port.
For location of the port in the tachograph refer to the tachograph manual.
TachoReader Mobile II
6
.
If, during data downloading, LEDs on the key light up in red, this means an error; see the topic:
codes ".
13
7 A
. fter the download is complete, both
were errors while downloading, the
If the device signals data download error, repeat the download. If download error persists, please use
another tachograph for downloading.
If the download in another tachograph is successful, take the tachograph returning faulty reading to the
service.
If the incorrect reading is repeated also on another tachograph, please contact the TachoReader
manufacturer service
8 A
. fter the reading, unplug the unit from the tachograph, remove the company card and the
driver card.
When you press the company card eject button, the tachograph asks: "Do you want to lock the
tachograph?".
checked
, otherwise check.
1 2
or in the tachograph.
automatically proceeds to retrieve data (
LE
Ds on TachoReader Mobile II turn green (if there
LE
D turns red).
.
44
–
the control lamps on the instrument
Lock tachograph yes/no.
LE
D flickers green).
"
"Error
11