Faq - inelo TachoReader Mobile II Manual

TachoReader Combo Plus

3.12. FAQ

Driver card is inserted in TachoReader Combo Plus and the LEDs on the device do not light up
In this case re-insert the card into the device, press it so that the device sounds a beep and
LE
the first D on the progress bar lights up.
The problem may also occur when TR Combo Plus is connected to a computer using a mini-
H
USB cable via a
If the problem persists, contact the manufacturer
After connecting TachoReader Combo Plus to computer LEDs on the progress bar do not
blink and the device is not detected in the system
Restart the computer.
If the above step does not help, to check the very device, connect it to another computer.
If the device is still not visible in the system, connect the device to the computer using a
different MINI USB cable.
If the problem persists, contact the manufacturer
Fig.TachoReader Combo - battery
UB. Connect the device directly to the USB port.
change.
'
s service .
44
'
s service .
44
34