inelo TachoReader Mobile II Manual page 24

TachoReader Combo Plus
Driver card download via tachograph
option:
Operations on the vehicle
We recommend that you read the operating instructions of the tachograph.
1. Turn the ignition switch to position II (ignition) - until the lights on the dashboard switch
on (switching on the tachograph).
We recommend to carry out the above step accompanied by the driver of the vehicle.
2. Insert a company card into any tachograph slot.
After reading the company card, some tachographs may request confirmation of "unlocking".
In this case, "unlock" the tachograph, or "Technical Data" and "Activities" will not be downloaded.
3
. Connect TR Combo Plus to tachograph using Tacho RC cable.
Position of the interface within the tachograph - see tachograph manual.
4
. Depending on the method and the scope of data download, click on the appropriate
button:
–
configuration (see:
The default configuration
"Technical Data",
the tachograph;
–
configuration (see:
The default configuration
"Technical Data",
only from the tachograph;
If, in the configuration window
downloads data from tachograph / driver card, depending on the
"Configuration
Activities -> Everything
downloads data from tachograph / driver card, depending on the
"Configuration
Activities -> Since last download
was checked, the data is downloaded according to the range of days
.
");
6
O
: download " verview", "
and "Detailed speed" only from
");
6
O
: download " verview", "
Select day range using this button
E
vents and faults",
E
vents and faults",
and "Detailed speed"
24