Download From Tachograph - inelo TachoReader Combo Plus Tutorial

Download from tachograph

7. Download from tachograph
Operations after connecting to a computer
1. Open the TR Combo Plus configuration window, and then, to configure button:
or select the type and scope of activities to be downloaded from the tachograph
(see: "Configuration
If you are not sure what to choose, click:
2. If you want to control the scope of the downloaded data directly on the device,
Select day range using this button
device " topic for more).
12
3. If you do not want to download data from the driver card via the tachograph
Driver card download via tachograph
option:
Operations on the vehicle
We recommend that you read the operating instructions of the tachograph.
1. Turn the ignition switch to position II (ignition) - until the lights on the dashboard switch
on (switching on the tachograph).
We recommend to carry out the above step accompanied by the driver of the vehicle.
2. Insert a company card into any tachograph slot.
After reading the company card, some tachographs may request confirmation of "unlocking".
In this case, "unlock" the tachograph, or "Technical data" and "Activities" will not be downloaded.
3. Connect TR Combo Plus to tachograph using Tacho RC cable.
Position of the interface within the tachograph - see tachograph manual.
" topic for more).
9
.
option (see: "Configuration directly in the
.
,
check
the:
uncheck
the
13