inelo TachoReader Mobile II Manual page 35

TachoReader Combo Plus
After connecting the TachoReader Combo Plus to the tachograph LEDs on the device do not
blink and data from tachograph are not downloaded
Switch the tachograph off and on, unplug and re-connect the device to the tachograph.
If the problem persists, check the device on another tachograph.
If the problem persists, contact the manufacturer
TR Combo Plus cannot read the driver card
Make sure that you insert the driver card reader correctly into the slot.
Check if the driver card is read by another digital card reader.
If the problem persists, contact the manufacturer
'
s service .
44
'
s service .
44
35