inelo TachoReader Mobile II Manual page 28

TachoReader Combo Plus
Option II - Simultaneous downloading data from driver card and the tachograph
1. For any selected configuration of
of activities to be downloaded from the tachograph (see:
more).
If you are not sure what to choose, click on the button:
A check
2. dditionally,
Option III - Configuration on the device - Downloading data from driver card only
1. Regardless of the chosen button configuration,
button
.
O
2. ther options do not affect the data download in this option.
Operations on the vehicle
We recommend that you read the operating instructions of the tachograph.
1. Turn the ignition switch to position II (ignition) - until the lights on the dashboard switch
on (switching on the tachograph).
We recommend to carry out the above step accompanied by the driver of the vehicle.
2. Depending on the selected option:
Option I
·
27
Option II
·
28
After reading the company card, some tachographs may request confirmation of "unlocking".
In this case, "unlock" the tachograph, or "Technical Data" and "Activities" will not be downloaded.
Option III
·
28
Old types of tachographs:
Option I
For and
27
Driver card download via tachograph
the:
- insert the driver card into any slot of the tachograph;
- - insert a company card and the driver card to any tachograph slots;
- insert the driver card into any slot of the tachograph;
Option III
it may also be required to insert the company card.
28
, or button, choose the type and scope
"Configuration
check Select day range using this
" topic for
6
.
option.
28