Install Handle; Grease Bucket - Camp Chef PG20CT V2 Warning & Instruction Booklet

ASSEMBLY INSTRUCTIONS
Remove all loose parts from the inside of the grill and
hopper. Lay a blanket or piece of cardboard down to protect
the grill.
ATTACH THE LEGS
With the help of another person, flip the grill upside down
on the blanket or cardboard. The grill lid and hopper lid will
swing open when doing this, so be careful not to damage
the lids. The grill may also want to roll on its lid so one
person should hold the grill steady while the other person
assembles the bottom legs and wheels.
1. Assemble the legs as shown in Fig. 1. Finger tighten
hardware.
2. Assemble wheels to legs as shown in Fig. 2.
3. Stand grill upright.
4. Tighten all hardware.

INSTALL HANDLE

1. Install the handle as shown in Fig 3.
2. Tighten all hardware.
FIG. 3

GREASE BUCKET

1. Hang grease bucket from tube as shown in Fig 4.
ASH CUP
1. Install Ash Cup as shown in Fig 4. Never use grill without
Ash Cup in place.
FIG. 1
INSTALL DRIP TRAY
1. Install the Drip Tray as shown in Fig 5 and Fig 6.
FIG. 2
FIG. 4
FIG.5