Emerson Rosemount 2160 Quick Start Manual page 23

September 2020
4.6 U.S.A.
4.6.1 Intrinsic Safety (IS), Non-Incendive (NI), Dust Ignition-proof (DIP)
I5
Summary of product certification
Protections
Project ID
Markings
Enclosure
Special Conditions for Safe Use
1. Use with Rosemount SmartPower
2. Warning – Potential Electrostatic Charging Hazard – The enclosure is
partially constructed from plastic. To prevent the risk of electrostatic
sparking, use only a damp cloth to clean the plastic surfaces.
4.7 Canada
4.7.1 Canada Intrinsic Safety (IS)
I6
Summary of product certification
Protections
Project ID
Markings
Control
drawing
Enclosure
Special Condition for Safe Use
Use with Rosemount SmartPower
Quick Start Guide
Intrinsic Safety (IS)
Non-Incendive (NI)
Dust Ignition-proof (DIP)
3036541
IS Class I/II/III, Division 1, Groups A, B, C, D, E, F, and G
IS Class I, Zone 0, AEx ia IIC
NI Class I, Division 2, Groups A, B, C, and D
DIP Class II/III, Division 1, Groups E, F, and G
T4 (Ta = -58 °F to +158 °F / -50 °C to +70 °C)
Type 4X / IP66
Intrinsic Safety (IS)
1786345
Class I, Division 1, Groups A, B, C, and D, T3C
Intrinsically Safe when installed in accordance with Rosemount
drawing 71097/1271
Type 4X / IP66
Single process seal
®
option P/N 753-9220-0001 only.
®
option P/N 753-9220-0001 only.
Quick Start Guide
23