York Altair Series User Manual page 20

1. Hang the indoor unit on the peg board,
and move the unit from left to right to
ensure that the hook is properly positioned
in the peg board.
2. Push toward the lower left side and the
upper right side of the unit toward the peg
board, until the hook is embedded in the
slot and makes a "click" sound.
● If your air conditioner is provided with
unit is connected in the factory, there is no need of connection.
● If the interconnection cord
the wiring diagram.
Constant speed
5 4 3
5 4 3
To Outdoor unit
NOTE:
※ This manual usually includes the wiring mode for the different kind of A/C.
We cannot exclude the possibility that some special type of wiring diagrams
are not included.
※
The diagram are for reference only. If the entity is difference with this wiring
diagram, please refer to the detailed wiring diagram adhered on the unit which
you purchased.
Indoor unit installation
Fixing the Indoor Unit
Wiring diagram
interconnection cord
is not provided, connection is needed in accordance with
1(L)
2(N)
To Outdoor unit
1(L)
2(N)
Connector
If there is a connector,
connect it directly.
- 18 -
, the wiring of the indoor
Variable speed
S
N
L
To Outdoor unit
N
L Lo
To Outdoor unit
S