Troubleshooting - York Altair Series User Manual

High wall inverter

Hide thumbs

Table Of Contents

Table of Contents

Clean and care

■

Mount the Filter

1. Reinstall the dried filter in reverse order of removal, then cover and lock the panel.

1. Check whether all the air inlets and outlets of the units are unblocked.

2. Check whether there is blocking in the water outlet of the drain pipe, and

immediately clean it up if any.

3. Check the ground wire is reliably grounded.

4. Check whether the remote control batteries are installed, and whether the power

is sufficient.

5. Check whether there is damage in the mounting bracket of the outdoor unit, and

if any, please contact our local service center.

1. Cut off the power source of the air conditioner, turn off the circuit breaker and remove

the batteries from the remote control.

2. Clean the filter and the unit body.

3. Remove the dust and debris from the outdoor unit.

4. Check whether there is damage in the mounting bracket of the outdoor unit, and if

any, please contact our local service center.