Table of Contents
Advertisement
Available languages
Available languages
EN
Wireless Operation
In optimal conditions, the WELL Panel can operate up to 300 m (900 ft) away from the W-DMX transmitter. The W-DMX
receiver in the WELL Panel must be paired with the W-DMX transmitter for wireless operation.
Initial Setup
1.
Turn the W-DMX transmitter on.
2.
Connect the W-DMX transmitter to a DMX controller.
3.
Place the WELL Panel within 300 m from the W-DMX transmitter.
4.
Turn the WELL Panel on.
Configuration
1.
From the WELL Panel's control panel, go to DMX Address.
2.
Select the start address, as with any other DMX compatible product.
3.
Go to Wireless Setting > Receive On/Off.
4.
Select On. (The Signal Strength Indicator will show a ? in front of the bars)
5.
Press the reset button on the W-DMX transmitter.
(The Signal Strength Indicator on theWELL Panel will show a ϟ in front of the bars for 3 seconds while a
connection is established.)
Product Pairing
If the WELL Panel has already been paired with the W-DMX transmitter, the Signal Strength Indicator in the middle of the
OLED screen will show the strength of the signal. In this case, the WELL Panel is ready to work in Wireless mode.
Pairing theWELL Panel and a new W-DMX transmitter
1.
From the WELL Panel's control panel, go to Wireless Setting > Receive Reset.
2.
Select Yes. The Signal Strength Indicator on the WELL Panel will show a ? in front of the bars.
3.
From the W-DMX transmitter, press <RESET> (the Signal Indicator on the transmitter will flash).
4.
Once the transmitter has found the WELL Panel, the Signal indicator on the W-DMX transmitter will illuminate
solid.
5.
The Signal Strength Indicator in the middle of the OLED screen on the WELL Panel will show the strength of the
signal.
W-DMX operation can be interrupted or inhibited by liquid masses between the transmitter and
receiver such as water, snow, or people. For best results, keep the area between the transmitter and
receiver clear of any liquid mass.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. The WELL Panel supports RDM protocol that allows feedback to monitor temperature and
changes to DMX Address, DMX Channel, Dimmer Mode, and LED Frequency menu options. Download the User
Manual from
www.chauvetprofessional.com
Color Blending Filter Lens
The Color Blending Filter Lens produces a very even light that is soft at the edges. Attach the Color Blending Filter Lens
easily with the built-in magnets.
3
QUICK REFERENCE GUIDE
for more details.
WELL Panel QRG Rev. 6
Advertisement
Table of Contents
