Page 2
Edition Notes The Maverick Silens 2 Profile User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Maverick Silens 2 Profile as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo, and Maverick Silens 2 Profile are registered trademarks or trademarks of Chauvet &...
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Maverick Silens 2 Profile User Manual Rev. 1 Page 1 of 31...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product and limit the overall intensity. Page 2 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
2. Introduction Description The Maverick Silens 2 Profile is a completely silent, fully featured 560 W 95+ CRI LED yoke profile fixture, featuring CMY+CTO color mixing, a four-blade framing shutter system with rotation, a color wheel, animation wheel, a 10:1 zoom, prism, two frosts, and two gobo wheels—one static and one rotating.
Introduction Product Dimensions 31.16 in 791.5 mm 16 in 405 mm 5.5 in 17 in 140 mm 432.8 mm 5.5 in 140 mm Page 4 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
3. Setup AC Power The Maverick Silens 2 Profile has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (e.g., circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications...
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Maverick Silens 2 Profile comes with a bracket to which you can attach a mounting clamp directly. Mounting clamps are sold separately. Make sure the clamps are capable of supporting the weight of this product.
DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com. DMX Linking You can link the Maverick Silens 2 Profile to a DMX controller using a 5-pin DMX connection or a WDMX connection. For more information about DMX, read the DMX primer at: https:// www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.
The followspot mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable the followspot mode of the Maverick Silens 2 Profile, hold <UP> and <LEFT> while the product is powering on. When the product is turned off and back on, the pan and tilt will return to normal function.
Do not black out while color wheel moving BL. O. Color Move Blackout while color wheel moving Do not black out while gobo wheels moving BL. O. Gobo Move Blackout while gobo wheels moving Maverick Silens 2 Profile User Manual Rev. 1 Page 9 of 31...
Page 14
Reset individual functions or all Reset Yes/No functions from start-up Frost Animation Zoom Entire Fixture Factory Settings Reset to factory default settings No such file! Upgrade Firmware xxx.EKL USB software upgrade Page 10 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Page 15
Shutter 1-1 Shutter 2 Shutter 2-1 Shutter 3 Shutter 3-1 Shutter 4 Shutter 4-1 Focus Focus Fine Auto Focus Zoom Zoom Fine Prism Prism Rotation Iris Frost Frost Fine Maverick Silens 2 Profile User Manual Rev. 1 Page 11 of 31...
Page 16
Cyan Shows all current values from input DMX Values Magenta 000–255 signals Yellow Color Hue Adjustment Red Shift Gobo 1 Gobo1 Rotation Gobo1 Rotation Fine Static Gobo Wheel Page 12 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Page 17
Information Shows all current values from input DMX Values Focus 000–255 signals (cont.) Focus Fine Auto Focus Zoom Zoom Fine Prism Prism Rotation Iris Frost Frost Fine Control Maverick Silens 2 Profile User Manual Rev. 1 Page 13 of 31...
Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller. Control Mode The Maverick Silens 2 Profile works with wired DMX, WDMX, Art-Net™, and sACN control signals. To select which protocol to use: 1. Go to the Settings main level.
Hue adjustment 128 255 0 to +25 green 000 010 No function Red shift 011 127 Red shift off 128 255 Red shift on Maverick Silens 2 Profile User Manual Rev. 1 Page 15 of 31...
Page 20
000 255 Movement, outward to inward movement 000 127 Swiveling from -25° to 0° Framing shutter 1 0° swiveling 129 255 Swiveling from 0° to +25° Page 16 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Page 21
Iris 214 234 Open, slow to fast 235 255 Close, slow to fast Frost 000 255 0–100% Frost fine 000 255 Fine control (16-bit) Maverick Silens 2 Profile User Manual Rev. 1 Page 17 of 31...
028 031 UV 032 187 Split color 188 219 Color scroll, fast to slow 220 223 Stop 224 255 Reverse color scroll, slow to fast Page 18 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Page 23
000 127 Swiveling from -25° to 0° Framing shutter 1 0° swiveling 129 255 Swiveling from 0° to +25° Framing shutter 2 000 255 Movement, outward to inward movement Maverick Silens 2 Profile User Manual Rev. 1 Page 19 of 31...
Page 24
080 087 Steady off 088 095 Steady mode 1 (environment temperature 26 °C) 096 103 Steady mode 2 (environment temperature 35 °C) 104 255 No function Page 20 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
3. Select from 270 (270°), 180 (180°), or 90 (90°). Blackout on Movement To set the Maverick Silens 2 Profile to black out on pan or tilt movement, color wheel movement, or gobo wheel movement: 1. Go to the Settings main level.
3. Select from No (do not swap) or Yes (swap so pan controls tilt and tilt controls pan). WDMX Reset To reset the WDMX connection and allow the Maverick Silens 2 Profile to connect to a WDMX transmitter: 1. Go to the Settings main level.
1. Connect the Maverick Silens 2 Profile products to receive the preset options by a DMX daisy chain. 2. Make the Maverick Silens 2 Profile with the preset options to transfer the first in the DMX daisy chain. 3. Power on all of the products.
4. Adjust the “zero” position for the selected function from 000–255. Web Server The Maverick Silens 2 Profile Web Server can be accessed by any computer on the same network as the product. It allows network access to system information and settings, such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If correctly installed, the gobo holder should easily slide into the gobo wheel slot. Diagram Locate Pull back Remove Gobo holder Gobo Retaining ring Maverick Silens 2 Profile User Manual Rev. 1 Page 27 of 31...
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans with compressed air. Damage may result. Page 28 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 30 of 31 Maverick Silens 2 Profile User Manual Rev. 1...
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Maverick Silens 2 Profile User Manual Rev. 1 Page 31 of 31...