Summary of Contents for Chauvet Professional Maverick Storm 2 BeamWash
Page 1
User Manual Model ID: MAVERICKSTORM2BEAMWASH...
Page 2
Edition Notes The Maverick Storm 2 BeamWash User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 2 BeamWash as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo and Maverick Storm 2 BeamWash are registered trademarks or trademarks of Chauvet &...
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Maverick Storm 2 BeamWash User Manual Rev. 2...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Maverick Storm 2 BeamWash User Manual Rev. 2...
2. Introduction Description The Maverick Storm 2 BeamWash is a powerful and compact IP65 moving head with a zoom range capable of wide 53.1° washes and intense tight 3.6° beams. An incredibly bright output of nearly 10,000 lumens and a low weight under 40 lbs makes the Maverick Storm 2 BeamWash well-suited for any application or venue size.
15.28 in 388 mm 9.98 in 253.5 mm 12.28 in 312 mm 19.72 in 501 mm 4.88 in 124 mm 15.28 in 388 mm 11.42 in 290 mm 10.26 in 260.7 mm Maverick Storm 2 BeamWash User Manual Rev. 2...
The Maverick Storm 2 BeamWash can receive a DMX, Art-Net™, sACN, or Kling-Net signal. The Maverick Storm 2 BeamWash has 2 Neutrik RJ45 through ports, and 5-pin DMX in and out ports. If using other compatible products with this product, each can be controlled individually with a single controller.
RDM protocol that allows feedback to make changes to menu map options. USB Software Update The Maverick Storm 2 BeamWash allows for software update through USB using the built-in USB port. To update the software using USB flash drive, do the following: 1.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Maverick Storm 2 BeamWash comes with a bracket to which you can attach a mounting clamp directly. Mounting clamps are sold separately. Make sure the clamps are capable of supporting the weight of this product.
<RIGHT> Navigates rightwards through the menu list Battery Powered Display The Maverick Storm 2 BeamWash has a battery powered display which enables access to the menu when the product is powered off. Press and hold <MENU> until the display activates (approximately 15 seconds).
Operation Menu Map Refer to the Maverick Storm 2 BeamWash product page on www.chauvetprofessional.com for the latest menu map. Programming Levels Description Control Settings Control Settings Main Level Basic Standard Sets the DMX personality Personality Advanced (see Control Personalities) Tour...
Page 14
Manually control and test all Test Mode Manual Test Background1 Dim 000–255 settings through the control panel Dimmer1 Shutter1 Red2 Green2 Blue2 White2 CTC2 Color2 Pattern2 LED Macro2 LED Ma. Speed2 LED Ma. Fade2 Background2 Maverick Storm 2 BeamWash User Manual Rev. 2...
Page 15
Display turns off after 5 minutes Display stays on Hold Holds last signal received Loss of Data Close Blacks out fixture Fan speed according to Auto product temperature Fans Full Fan speed set on high Quiet mode Maverick Storm 2 BeamWash User Manual Rev. 2...
Page 16
DMX daisy chain USB Update Update firmware via USB C Pan/Tilt Reset Reset individual functions or all Zoom Function functions from start-up Factory Reset to factory default settings Settings Maverick Storm 2 BeamWash User Manual Rev. 2...
Page 17
Information input signals, 000–255 LED Ma. Fade LED Macro2 LED Ma. Speed2 LED Ma. Fade2 Background Background Dim. Bg. Dim. Fine Background2 Background Dim. 2 Bg. Dim. Fine2 Dimmer Dimmer Fine Dimmer2 Maverick Storm 2 BeamWash User Manual Rev. 2...
Page 18
Green 1–12 Fine Blue 1–12 Blue 1–12 Fine Dimmer 13–31 Dimmer 13–31 Fine Red 13–31 Red 13–31 Fine Green 13–31 Green 13–31 Fine Blue 13–31 Blue 13–31 Fine White 13–31 White 13–31 Fine Maverick Storm 2 BeamWash User Manual Rev. 2...
Control Mode The Maverick Storm 2 BeamWash can work with a single controller or with 2 controllers running 2 different control protocols. In Dual Control mode, one protocol controls the Movement, and the other protocol controls the Pixels.
2. Select the Network Setting option. 3. Select the SubMask option. 4. Set the 4 values of the subnet mask from 000–255. Control Channel Assignments and Value Pixel Chart ↑Rear panel↑ ↓Front panel↓ Maverick Storm 2 BeamWash User Manual Rev. 2...
25 29 Main strobe 000 255 See the Strobe Chart 10 26 30 Zoom 000 255 Zoom, narrow to wide 11 27 31 Control 000 255 See the Control Chart Maverick Storm 2 BeamWash User Manual Rev. 2...
Page 30
– – 43 Main fg. fine blue 000 255 0–100% – 34 44 Main fg. white 000 255 0–100% – – 45 Main fg. fine white 000 255 0–100% Maverick Storm 2 BeamWash User Manual Rev. 2...
110 124 Random strobe, fast to slow 225 229 On 125 129 On 230 244 Pulse strobe 2, fast to slow 130 144 Random 100–0% strobe, fast to slow 245 255 On Maverick Storm 2 BeamWash User Manual Rev. 2...
095 099 Normal pan 248 255 Calibration off Configuration (Test) The test modes allow all functions of the Maverick Storm 2 BeamWash to be tested automatically or individually. Automatic Test To run an automatic test of all product functions: 1.
3. Select from NO (do not swap), or YES (swap so pan controls tilt and tilt controls pan). WDMX Reset To reset the WDMX connection and allow the Maverick Storm 2 BeamWash to connect to a WDMX transmitter: 1. Go to the Setup main level.
Changes to settings automatically save to the currently selected Preset. • If no Preset has been selected, changes to settings save to PRESET A. • After selecting a Preset, the product will restart. Maverick Storm 2 BeamWash User Manual Rev. 2...
To transfer saved Presets from one Maverick Storm 2 BeamWash to another: 1. Connect the Maverick Storm 2 BeamWash products to receive the Presets by a DMX daisy chain. 2. Make the Maverick Storm 2 BeamWash with the Presets to transfer the first in the DMX daisy chain.
Operation Web Server The Maverick Storm 2 BeamWash Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans with compressed air. Damage may result. Maverick Storm 2 BeamWash User Manual Rev. 2...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Maverick Storm 2 BeamWash User Manual Rev. 2...
Voice: +52 (728) 690-2010 Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Maverick Storm 2 BeamWash User Manual Rev. 2...