Force Post Pre-Authorization; Close A Pre-Authorization - TD Luxe 6200m Pre-Authorizations Manual

b) Enter the expiry date and press OK.
c) Enter the CVD and press OK. You may not see this step as it varies by credit card. Go to step 4.
4. The screen shows the transaction total and the receipts print. Press CONTINUE. You can REPRINT the
receipt or FINISH the transaction.

Force post pre-authorization

Perform this transaction if you wish to create a new pre-authorization.
1. From the Desktop screen  Debit / Credit icon  Force Post  Pre-Auth.
2. Enter the amount and select OK.
3. Enter the authorization number and press OK.
4. Confirm the authorization number and press OK.
5. Select one of the following payment methods.
a)
Insert the card. Go to step 6.
OR
a) Swipe the card and verify the card info with what is on the screen and select OK. Go to step 6.
OR
a) Manually enter the account number and press OK.
b) Enter the expiry date on the PINpad and press OK. Go to step 6.
6. The screen shows the transaction total and the receipts print. Press CONTINUE. You can REPRINT the
receipt or FINISH the transaction.

Close a pre-authorization

Perform this transaction to close an existing pre-authorization.
1. From the Desktop screen  P. Completion icon
2. Enter the invoice number from the initial pre-authorization receipt and select OK. If you do not have
the invoice number, you must use the Tran. Recall icon to look up the initial pre-authorization.
3. Enter the final amount and press OK. If the amount exceeds the original amount, you must cancel the
pre-authorization and either do a normal purchase, or create a new pre-authorization.
4. Confirm the amount is correct.
5. The screen indicates that the transaction is approved and the receipts print. If there are other pre-author-
izations open you will be prompted to enter another invoice number. Press Cancel if you don't want to
close anymore.
2