Line-Out (6-Channel Front-Out) Port Connector; Line-In (6-Channel Rear-Out) Port Connector; Mic-In Port Connector; Midi/Game Port Connector - Shuttle AB45 User Manual

B5

Line-Out (6-Channel Front-Out) Port Connector

Line-Out is a stereo output port through
which the combined signal of all internal
and external audio sources on the board is
output. It can be connected to 1/8-inch TRS
stereo headphones or to amplified speakers
B6

Line-In (6-Channel Rear-Out) Port Connector

Line-In is a stereo line-level input port that
accepts a 1/8-inch TRS stereo plug. It can be
used as a source for digital sound recording,
a source to be mixed with the output, or both.

Mic-In Port Connector

B7
Mic-In is a 1/8-inch jack that provides a mono
input. It can use a dynamic mono or stereo
microphone with a resistance of not more than
600 Ohms.

MIDI/GAME Port Connector

B8
The MIDI/GAME port is a 15-pin female con-
nector. This port can be connected to any
IBM PC compatible game with a 15-pin D-
sub connector.
MIDI Instrument Connection MIDI Instrument Connection MIDI Instrument Connection
MIDI Instrument Connection MIDI Instrument Connection
You will need a MIDI adapter to connect a MIDI compatible instrument
to the sound card. The MIDI adapter can in turn be connected to the
Joystick/MIDI port. You will also need the MIDI sequencing software to
run MIDI instruments with your computer etc. into this connector.
- 31 -
Line-Out (6-Channel
Front-Out)
Line-In (6-Channel
Rear-Out)
Mic-in
MIDI/GAME Port