STIEBEL ELTRON DHM 3 Operation And Installation page 36

INsTALLATIoN
Installation
Undersink installation, non-pressurised, with non-pressurised
tap
36 | DHM
10.2.1 Appliance installation
f Mount the appliance on the wall. f
Note
The wall must have a sufficient load-bearing capacity.

f Undo the cover fixing screws by two turns. f
f Undo the snap fastener using a screwdriver. f
f Remove the appliance cover with the heater towards the f
front.


www.stiebel-eltron.com