Table of Contents
Advertisement
USER GUIDE //
STRETCHER SERIES PC900
First edition: 2021/05
01
INTRODUCTION
18. Register and store with these instructions: lot number, place and date of purchase, first date of use, date
of checks, name of users, any comments.
19. When the device is being used, the assistance of qualified staff must be guaranteed.
20. Do not store the device underneath any heavy objects which could cause structural damage.
21. Store in a cool, dry, dark place and do not expose to direct sun.
22. Store and transport device in its original packaging.
23. The device must not be exposed or come into contact with any source of combustion or inflammable
agents.
24. Position and adjust the device taking care not to cause any obstruction to rescuers and or any other
rescue equipment.
25. Attention: laboratory testing, post production tests and instruction manuals cannot always consider
every possible scenario for use. This means that in some cases the performance of the product could be
notable different from results to date obtained. Instructions are continually being updated and are under
tight surveillance of fully qualified staffs with adequate technical formation.
26. Both public and private operators are obliged to inform the manufacturer of any measures that should
be adopted to guarantee the safety and the health of the patients and the users of any medical device.
27. As a distributor or end users of products manufactured and/or marketed by Promeba, S.L., you are
strictly required to have a basic knowledge of any legal requirements existing in the goods final destination
country applying to the devices contained in this supply (including laws and norms regarding technical
specifications and/or safety requirements) and therefore you are also strictly required to have the necessary
knowledge to guarantee all aspects regarding the total conformity of the products to the regulations in the
relevant territory.
28. Promptly notify PROMEBA regarding any revisions to be made by manufacturer in order to guarantee
the conformity of the product to the territory's legal specifications (including those resulting from rules
and/or norms of other nature).
29. Act with all due care and diligence, and contribute to ensure conformity to general safety requirements
of all devices marketed in the territory, by providing final users with all necessary information for carrying
out periodical checks on their devices, as specified in the relevant user manual.
30. Actively contribute to product safety checks on products sold, by communicating any relevant risk
analysis information both to the manufacturer and to any competent authorities so that the necessary ac-
tions can be promptly taken.
31. Be aware that in the event of any failure to conform to the above mentioned requirements you will be
deemed fully responsible for all damages that might occur. Therefore we expressly disclaim any responsibi-
lity and/or liability for your non-compliance with the present "Regulatory provisions".
7
Advertisement
Table of Contents
