Troubleshooting - TMC Aquarium AQUARAY MiniLED 500 Instructions For Installation And Use Manual

A MiniLED 500 lamp unit should need little or no
maintenance once set up. However due to salt
deposits and the high calcium level in marine
aquariums it is common for deposits to build up on
the body of the unit.
Therefore it is recommended that:-
a. The lens face of the lamp unit is cleaned
periodically with a warm, damp cloth.
b. The heat sink on the rear of the unit is kept free
of large particles of salt and other films or
deposits which might obstruct the free movement
of air around the vanes of the heat sink.
Occasional cleaning with a small brush and/or dry,
lint-free cloth is recommended.
TROUBLE SHOOTING
Problem: The lamp unit does not switch on.
Solution: Check cable connection between lamp unit
and PSU.
Solution: Check power cord is firmly connected to PSU.
Solution: Check (and replace if necessary) the fuse in the
power cord plug (UK only).
If the lamp unit is still not switching on, return the
PSU and lamp unit to your local stockist for further
testing and replacement if necessary.
Problem: The lamp unit starts flashing.
Solution: Return the PSU to your local stockist for
replacement with an authentic Tropical Marine
Centre part.
Problem: One or more lamps in the lamp unit
do not come on or cease to work.
Solution: Return lamp unit to your local stockist for
replacement with an authentic Tropical Marine
Centre part.
6