TMC Aquarium AQUARAY MiniLED 500 Instructions For Installation And Use Manual page 3

INSTRUCTIONS FOR
INSTALLATION AND USE
Important Safety Information
- This MiniLED 500 comprises a lamp unit with a
separate mains power supply unit (PSU) which
supplies a constant DC (low voltage) power
supply to the lamp unit.
Power supply for MiniLED 500 lamp unit:
INPUT-100-240 VAC 50-60Hz 0.15A
OUTPUT-19.5 VDC 0.7A
Caution: Do not use any other power supply unit
with this lamp unit as the lamp unit may not work
and this may cause irreparable damage to the lamp
unit. If the PSU supplied with the unit needs to be
replaced then please obtain an authentic AquaRay
PSU supplied by one of Tropical Marine Centre's
local stockists.
- Always isolate the PSU from the mains
electricity before installing or carrying out
any maintenance to the lamp unit.
Caution: The power supply unit (PSU) is
not waterproof and therefore must not be
mounted above the aquarium or in any position
where it may accidentally fall into water or be
splashed by water.
Caution: Do not position the PSU in an enclosed
space. Ventilation must be provided to ensure it
does not overheat.
Caution: Do not operate this appliance if any part
of it has a damaged cord or plug, is malfunctioning,
or has been dropped, immersed in water or
damaged in any way. If the external cord of this
unit is damaged, it should be replaced by a cord
exclusively available from the manufacturer
or his service agent.
- This unit is designed to be used indoors
and is not suitable for any outdoor
applications.
Caution: Ensure the lamp unit is securely installed
above the tank before operating.
Caution: The lamp must be installed no less than
25mm from the water surface.
Caution: DO NOT SUBMERGE THE LAMP UNIT.
If the unit is submerged the lamp unit guarantee
will be invalidated.
- Please Read Carefully
1