Table of Contents
Advertisement
Introduction
USB Ports
2 USB Host Controllers with total of 4 ports
!"
USB 1.1 compliant
"!"
Supports wake-up from S1 (power on suspend), S3 (Suspend to RAM,depends on
"!
device)
Onboard I/O
One floppy port supporting up to two 3.5
"!"
1.44M/2.88M format
Two high speed 16550 compatible UARTs (COM1/COM2/COM3/COM4 selective) with
"!"
16 byte send/receive FIFO
One parallel port supports SPP/EPP/ECP mode
! "
Infrared interface
"!"
All I/O ports can be enabled/disabled in the BIOS setup
"!"
Onboard LAN (Optional)
10/100 Mbit/sec Ethernet support
!"
10/100M LAN interface built-in on board
!"
Onboard Audio
(available on P1D-A,P1-AL)
AC’97 2.1 Specification Compliant
!"
Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
"!"
amplifier and MIDI/Joystick Connector
AGP Interface
AGP Connector supports AGP 2.0 including AGP 4x data transfers
"!"
BIOS
Licensed advanced AWARD(phoenix) BIOS
"!"
Supports Flash RAM with plug and play ready
! "
Supports IDE CD-ROM or SCSI boot up
"!"
"
"
or 5.25
floppy drives with 360K/720K/1.2M/
Manual for P1D series
Advertisement
Table of Contents
