QDI PlatiniX 1D Series Manual page 24

Installation Instructions
Enable/Disable onboard LAN (JLAN)
(Available on P1D-L/AL)
This Jumper allows you to use the onboard LAN function. Before using this function,set
JLAN with pin1 and pin2 closed.Otherwise set JLAN with pin2 and pin3 closed for disabling.
Wake-Up On LAN (JP5)
(Available on P1D-L/AL)
This Jumper allows you to enable or disable the onboard LAN wake up function.If you wish
to use wake on LAN function,set the jumper JP5 as closed.Otherwise ,set JP5 as opened
for disabling this function.Before using this function,set “Wake-Up by Ring/ LAN” as En-
abled in the “POWER MANAGEMENT SETUP” section of the BIOS. Save and exit, then boot
the operating system once to make sure this function takes effect.
Disable:
Enable:
Enabled
Disabled
Manual for P1D series
1
2
JLAN
3
1
2
JLAN
3
JP5
1
2
JP5
1
2