Device Configuration - Omron CJ Series Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedures in this document are as
follows:
Personal computer
(CX-One installed,
OS: Windows 7)
USB cable
Manufacturer
OMRON Serial Communications Unit
OMRON CPU Unit
OMRON Power Supply Unit
OMRON CX-One
OMRON CX-Programmer
OMRON CX-Protocol
OMRON CX-Programmer project file
(Ladder program)
OMRON CX-Protocol project file
(Protocol macro data)
- Personal computer (OS: Windows 7)
- USB cable
(USB 2.0 type B connector)
OMRON RS-232C cable
(for PLC or programmable terminal)
OMRON Sensor Controller
OMRON Sensor Head
OMRON Calibration ROM
OMRON
24 VDC power supply (for Sensor
Controller) (DC24V 2.5A 60W）
Precautions for Correct Use
Prepare latest project files of both CX-Programmer and CX-Protocol beforehand.
To obtain a project file, contact your OMRON representative.
5．Applicable Devices and Device Configuration
CJ2M-CPU12
CJ1W-SCU42
RS-232C cable (for PLC or
programmable terminal)
Name
ZW-7000
Calibration ROM
24 VDC power supply
(for Sensor Controller)
Model
CJ1W-SCU42
CJ2M-CPU12
CJ1W-PA202
CXONE-AL[][]C-V4
/AL[][]D-V4
(Included in CX-One)
(Included in CX-One)
P652_CJ_PMCR232C_OMR
ON_ZW-7000_EV100.cxp
P652_CJ_PMCR232C_OMR
ON_ZW-7000_EV100.psw
-
-
ZW-XPT2
ZW-7000
ZW-S7030
(supplied with Sensor Head)
S8VS-06024
ZW-S7030
Version
Ver.2.0
Ver.2.0
Ver.4.[][]
Ver.9.60
Ver.1.99
Ver.1.00
Ver.1.00
Ver.2.020
6