CRANKCASE
CRANKCASE COVER
REMOVAL/INSTALLATION
Drain the engine oil (page 3-4).
Remove the casing (page 10-4).
Position the engine at TDC of the compression stroke
before removing the cover(page 3-9).
DOWEL PIN (8 x 12 mm) (2)
CASE COVER PACKING
OIL FILLER CAP
(With oil level gauge)
13-4
OIL FILLER CAP PACKING (2)
CRANKCASE COVER
OIL FILLER CAP
BOLT (8 x 40 mm) (7)
24 N·m (2.4 kgf·m, 18 lbf·ft)