Honda WT30XK4 Manual page 48

AIR CLEANER
REMOVAL/INSTALLATION
BREATHER TUBE
INSTALLATION:
After installing the air cleaner elbow,
insert the breather tube into the hole
of the cylinder head cover as shown.
HIGH TENSION CORD
BREATHER TUBE
ANGLED END
HEAD COVER
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
WING NUT
AIR CLEANER
ELEMENT (PAPER)
BOLT (6 x 22 mm)
COLLAR
AIR CLEANER
COLLAR (2)
NUT (6 mm) (2)
9 N·m (0.9 kgf·m, 6.6 lbf·ft)
FUEL SYSTEM
NUT
AIR CLEANER
COVER
GROMMET
AIR CLEANER
ELEMENT (FOAM)
NOISE SILENCER
AIR CLEANER
ELBOW SEAL
AIR CLEANER ELBOW
REMOVAL/INSTALLATION:
Remove and install the air
cleaner elbow with the fuel
cock lever in the OFF position
and the choke lever in the
CLOSE position.
Before installation, clean the
inside of the air cleaner elbow.
6-5