Create A Motion Perfect Project; Install Motion Perfect On Your Pc; Create A New Project In Motion Perfect - Panasonic MINAS A6 Multi Quick Start Manual

Position control with trio host controller over ethercat

Hide thumbs Also See for MINAS A6 Multi:

Table of Contents

Create a Motion Perfect project

4.1

The servo drive system is controlled with TRIO's Motion Perfect software. Install this

software and the Panasonic ESI file on your PC.

Download the Motion Perfect software from TRIO's website and execute the installation

file.

Download the Panasonic ESI file (Panasonic_MINAS_A6Multi_V*.xml).

Start Motion Perfect.

The download links can be found under

4.2

You must set the IP address for the Ethernet connection between your PC and the host

controller. The default IP address of the host controller is 192.168.0.250. The IP address of

your PC must be in the same IP range. In this example we use the IP address 192.168.0.10.

Set the IP address in your PC.

In Windows, go to "Network Connections" > "Change adapter options". Select

"Ethernet" > "Properties". On the "Network" tab, select "Internet protocol, Version

4 (TCP/IPv4)" > "Properties". Select "Use the following IP address" and set the IP

address.

Example:

Select the Motion Perfect icon on your desktop to start the software.

QS10006_V1.0_EN

IP address: 192.168.0.10

Subnet mask: 255.255.255.0

(settings for default gateway and preferred DNS server not required)

4 Create a Motion Perfect project

Available software

(page 5).

Table of Contents