Connectors Of The Trio Mc6N-Ecat Host Controller - Panasonic MINAS A6 Multi Quick Start Manual

Connectors for DC circuits with and without bus bars
X7 connector (for driver configuration)
The driver module is configured using the PC configuration software PANATERM. Use a
commercially available USB A to mini-B cable to connect the PC to the driver module.
(1) X7: USB connector on driver module
Connector X7 for PC connection
3.5

Connectors of the TRIO MC6N-ECAT host controller

The image shows the front view of the host controller.
(3)
(1) Programming port
(2) EtherCAT port
(3) 24V power supply
Front view of TRIO MC6N-ECAT host controller
Programming port
Connect an Ethernet cable between this connector and the Ethernet port of your PC.
QS10006_V1.0_EN
(1)
(1)
(2)
3 Wiring
11