Power Supply Connector; Unit Connectors - Panasonic FP7 User Manual

(5) Power supply connector

Connected with an external power supply (24V DC); When a power supply unit is used, do not
connect this.
(6) DIN hook
Used for fixation on the DIN rail.
(7) LAN port (CPS4E, CPS3E)
Port for connection to Ethernet LAN
(8) USB port
Connected to a PC using the tool software

(9) Unit connectors

Connected to the internal circuit of I/O units and intelligent units
(10) CF card cover
Number
10-1 Battery holder
10-2 SD memory card slot
10-3 Card operation switch
10-4 Power supply connector
(11) Mode switch
Switch position
RUN (left)
PROG. (middle)
COPY (right, momentary)
(Note) Whether the switch is set to RUN or PROG., the mode can be switched through remote operation from the
programming tool. When power is turned on again, it operates in the mode set on the switch.
(12) Fixing hook
Used for fixing a power supply unit to the CPU unit.
Name
Attach a battery.
Insert an SD memory card.
Select between ROM operation or SD operation. By selecting SD
operation, provisional operation from the SD memory card
becomes possible.
Connected to a power supply connector
Set to the RUN mode. The program is executed and operation begins.
Set to the PROGRAM mode.
When the switch is set to COPY, a project stored in the internal RAM /
ROM1 is transmitted to ROM2 as a backup project.
Functions
Operation Mode
2.1 CPU Unit
2-3