Tabletop Operation; Dip Switch Settings - Siemens SISTORE MX Installation Manual

Getting started with the SISTORE MX
6.2

Tabletop operation

6.3

DIP switch settings

64
Siemens Building Technologies
Fire Safety & Security Products
When operating the SISTORE MX on a tabletop keep the following in mind:
The device must stand by itself.
There must be 85 mm of free space on the sides of the device. Otherwise the
device will shut down automatically due to overheating.
PLEASE NOTE
Pull the power plug and allow the device to cool down. Then restart the
device.
Do not place any objects on top of the device. Do not cover the device.
Do not place the device in direct sunlight.
Do not allow the device to come in contact with fluids of any kind.
No more than three SISTORE MX devices may be stacked.
Observe the limits for operating temperature and relative humidity. See Section 4:
SISTORE MX specifications.
1 to 8 (75 Ohm termination)
1 75 Ohm termination
Dipsw Assignment
1 VIN13
2 VIN14
3 VIN15
4 VIN16
07.2005