Sistore Mx Connections And Displays; Connections On The Back Of The Device - Siemens SISTORE MX Installation Manual

SISTORE MX connections and displays

7 SISTORE MX connections and displays
7.1

Connections on the back of the device

2
1
5 6
66
Siemens Building Technologies
Fire Safety & Security Products
The following connections are available on the back side of the SISTORE MX
device:
3 4
7 8 9 10 11
Fig. 2 SISTORE MX back side
1 Fan
2 Video Output
3 On/Off
4 Video Input
5 Power supply
6 LAN/USB
7 COM 1/COM 2
RS485
8 VGA
9 L-out
10 L-in
11 MIC
12 SCSI
13 Digital I/O
Input
14 Digital I/O
Output
15 Digital I/O
Control
12
Video outputs, 50 Hz/60 Hz
These outputs should be connected to inputs of the same video
standard (e.g. PAL), as otherwise it will not be possible to operate
these video outputs. Therefore you need a VOB license.
On/Off switch
Video input sockets
Up to 32 cameras can be connected depending on the model and
the license.
100 – 240 V, 50 – 60 Hz, 120 W
(use only the power supply provided)
LAN: LAN connector (RJ45 network cable)
USB: connection of max. 2 customary USB-able devices
(e.g. USB-ISDN modem, printer, mouse, keyboard, DVD burner)
Please note: The use of external hard disk connected via USB is not
allowed!
Connector for PTZ cameras or a CKA48xx control unit.
Connection socket for a standard PC monitor
Connection socket for standard loudspeakers or headphones
Not used
Connection socket for a microphone for speech recording
(e.g. standard PC microphone)
Connector for additional SCSI hard disks or RAID systems
Trigger inputs 1 ... 32.
For more information, see Section 7.1.1: Trigger inputs and digital
inputs.
Digital outputs 1 ... 32
Digital inputs 1 ... 8
13 14 15
07.2005