How To Set Up The Magtek Pin Pad Scra Demo; How To Build The Magtek Pin Pad Scra Demo; How To Install The Magtek Pin Pad Scra Demo In Windows Store - Magtek IPAD Programmer's Reference Manual

2 - How to Set Up the MagTek PIN Pad SCRA Demo

2 How to Set Up the MagTek PIN Pad SCRA Demo
To set up the MTPPSCRAPCL Libraries, download the DynaPro/DynaPro Go/DynaPro Mini
Windows Store SDK Install, available from MagTek.com (Support > PIN Pads > DynaPro >
Software > IPAD/DynaPro/DynaPro Go/DynaPro Mini Windows API) and run 99510127.exe.
2.1

How to Build the MagTek PIN Pad SCRA Demo

To build the MTPPSCRADemo.WSDesktop software, follow these steps:
1) Launch Visual Studio and open
found in C:\Program Files (x86)\MagTek\PCI PED NET PCL SDK
and
C:\Porgram Files\MagTek\PCI PED NET PCL SDK
2) In the
Solution Explorer
3) Open Reference and add MTDevice.dll, MTLIB.dll, MTPPSCRAPCL.dll, MTPPServicePCL.dll
4) Select >
Build Configuration and Platform
5) Select Build > Build MTPPSCRACSDemo.WSDesktop
To Run/Debug the MTPPSCRADemo.WSDesktop software, follow these steps:
1) Select Build > Configuration equal to Debug and Build platform to AnyCPU.
2) In VisualStudio, select
MTPPSCRADemo.WSDesktop, or select
2.2

How to Install the MagTek PIN Pad SCRA Demo in Windows Store

To install and launch the MTPPSCRA Windows Store Demo, follow these steps:
1) Unzip the package from
Store Demo\MTPPSCRADemo_WinStore.zip
PCL SDK\Windows Store Demo\MTPPSCRADemo_WinStore.zip
2) Open the folder:
MTPPSCRADemo_WinStore\App\AppPackages\MTPPSCRADemo.WSDesktop_1.0.0.25_Wi
nStoreDemo_Test
3) Right Click
Add-AppDevPackage.ps1
4) Press and
Y Enter
5) Press Enter again to install the signing certificate.
6) Click when prompted to confirm.
"I Agree"
7) Log in using a Microsoft Windows Store Development Account.
8) Press and
Y Enter
9) PowerShell will show
10) Press Enter to close PowerShell.
IPAD, DynaPro, DynaPro Go, and DynaPro Mini| PIN Encryption Devices | Programmer's Reference (Microsoft Windows Store)
Page 12
MTPPSCRADemo.WSDesktop.csproj.
, select
MTPPSCRADemo.WSDesktop
>
Debug Start Without Debugging
Debug
C:\Program Files (x86)\MagTek\PCI PED NET PCL SDK\Windows
.
and select
to confirm the installation.
to continue the installation.
"Success: Your app was successfully installed."
on Windows 32bit Machine.
.
.
.
to run the
>
Start Debugging
or
C:\Program Files\MagTek\PCI PED NET
Run with PowerShell
The project file can be
on Windows 64bit Machine
to run it in debug mode.
.