S&A CWUL-05 User Manual page 6

<4> Operation status and parameters
adjustment
Default setting of T-506B new model intelligent temperature controller is Intelligent
temperature mode ,water temperature is setting 25℃, customer could adjust the
1.Temperature controller panel introduction temperature according to requirement.
(1). Indicators of temperature controller working status:
COMP
SV
Heating
INT Ctrl
CT Ctrl
PARAM Set
ALM OUT
Room Temp
ST DLA
(2). Press
display restored. (Meanwhile, Room Temp light is on, displaying room
temperature.)
(3). keys are for modifying parameters values and
are for switching parameter items.
(4). RST key: confirm
(5). SET key: setting function
ON, compressor working
ON, solenoid valve working
ON, heating rod working
ON, controller working in intelligent control mode
ON, controller working in constant temperature control mode
ON, controller working in parameters setting mode
ON, alarm output status
ON, displaying room temperature
ON, starting up delay status
key to show the room temperature, 6 seconds later default
6
CWUL-05/10/20 Series
keys