Advertisement
OMNEO Configuration
OMNEO OMI Card Configuration
1.
Use the Quick Start Guide OMI – OMNEO Matrix Interface to install the OMI card into an
ADAM or ADAM-M.
2.
Connect the OMI card to your network via the Ethernet Connector J1 or the fibre connector.
3.
Using AZedit under Options\Preferences\Discovery select your network interface from the
drop down list that will be used for the OMNEO configuration.
4.
Using AZedit under Options\Port Allocation table assign port numbers to the OMI card.
2
Advertisement
Need help?
Do you have a question about the OMNEO and is the answer not in the manual?