Table of Contents
Advertisement
5.2.3
Creating a RAID 10 set (RAID 0+1)
To create a RAID 10 set:
1.
From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change
2.
Enter a name for the RAID 10 set, then press <Enter>.
3.
When the RAID Level item is highlighted, press the up/down arrow key
to select RAID 10(RAID0+1), then press <Enter>.
4
When the Disks item is highlighted, press <Enter> to select the hard
disk drives to configure as RAID. The SELECT DISKS screen appears.
5
Use the up/down arrow key to highlight a drive, then press <Space>
to select. A small triangle marks the selected drive. Press <Enter>
after completing your selection.
6.
When the Stripe Size item is highlighted, press the up/down arrow key
to select the stripe size for the RAID 10 array, then press <Enter>.
The available stripe size values range from 8 KB to 128 KB. The
default stripe size is 64 KB.
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
7.
Key in the RAID volume capacity that you want then press <Enter>
when the Capacity item is highlighted. The default value indicates the
maximum allowed capacity.
ASUS P5MT-C
[
CREATE ARRAY MENU
Name:
Volume10
RAID Level:
RAID10(RAID0+1)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
XXX.X GB
Create Volume
[
DISK/VOLUME INFORMATION
cannot contain special characters.
[TAB]-Next
[ESC]-Previous Menu
]
]
[Enter]-Select
5-7
Advertisement
Table of Contents
