Award Bios Description; Entering Setup; Load Setup Defaults; Standard Cmos Setup - QDI LegenX 8 Manual

Table of Contents

Advertisement

AWARD BIOS Description

Entering Setup

Power on the computer, when the following message briefly appears at the bottom of the
screen during the POST (Power On Self Test), press <Del> key or simultaneously press
the <Ctrl> + <Alt> + <Esc> keys, to enter the AWARD BIOS CMOS Setup Utility.
Once you have entered, the Main Menu (Figure 1) appears on the screen. The main menu
allows you to select from eleven setup functions and two exit choices. Use the arrow
keys to select among the items and press the <Enter> key to accept or enter the sub-
menu.
Note:The "System Monitor" item w ill not be displayed if there is no system
monitor chips on the motherboard.

Load Setup Defaults

The Setup Defaults are common and efficient. It is recommended that users
load the setup defaults first, then modify the needed configuration settings.

Standard CMOS Setup

The basic CMOS settings included in "Standard CMOS Setup" are Date, Time, Hard Disk
Drive Types, Floppy Disk Drive Types, and VGA etc.
the item, then use the <PgUp> or <PgDn> keys to select the value you want in
each item.
Press <Del> to enter SETUP
Figure-1 Main Menu
Use the arrow keys to highlight
Manual for LegenX 8
Chapter 3
15

Advertisement

Table of Contents
loading

Table of Contents