Emerson Rosemount 3051 Quick Start Manual page 21

December 2019
4.5.3 Europe
I1 ATEX Intrinsic Safety
Certificate Baseefa12ATEX0228X
Standards
Markings
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a hazardous
area. The power module has a surface resistivity greater than 1 GΩ
and must be properly installed in the wireless device enclosure. Care
must be taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.
4.5.4 International
I7 IECEx Intrinsic Safety
Certificate
Standards
Markings
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth.
2. The Emerson 701PGNKF Power Module may be replaced in a
hazardous area. The power module has a surface resistivity greater
than 1 GΩ and must be properly installed in the wireless device
enclosure. Care must be taken during transportation to and from the
point of installation to prevent electrostatic charge build-up.
4.5.5 Brazil
I2 INMETRO Intrinsic Safety
Certificate UL-BR 13.0534X
Standards ABNT NBR IEC 60079-0:2008 + Errata 1:2011, ABNT NBR IEC
Markings
Quick Start Guide
EN 60079-0: 2012, EN 60079-11: 2012
Ex II 1 G Ex ia IIC T4 Ga, T4(–40 °C ≤ T
IECEx BAS 12.0124X
IEC 60079-0: 2011, IEC 60079-11: 2011
Ex ia IIC T4 Ga, T4(–40 °C ≤ T
60079-11:2009
Ex ia IIC T4 IP66 Ga, T4(–40 °C ≤ T
Quick Start Guide
≤ +70 °C) IP66/IP68
a
≤ +70 °C) IP66/IP68
a
≤ +70 °C)
a
21