Table of Contents
Advertisement
8:1 Adjusting the brakes
The brakes are infinitely adjustable.
-
Loosen the screw (A) a
couple of turns and slide the
brake until the brake block
is about 15-20 mm from the
tyre when the brake is not
applied.
-
Ensure that the brake is
straight in the groove and
tighten the nut appr. 5 Nm.
Test the brakes.
8:2 Drum brake
To operate the drum brake pull brake
handle upwards (see illustration).
8:3 Drum brake, parking brake
To operate the parking brake pull brake
handle upwards (see picture). Hold the
handle in braked position and press
button (A) down. The chair is now
8:4 Drum brake, brake settings
When adjusting the brake loosen
nut (A) and adjust the brake by mov-
ing (B) up/down.
When the brake has a reasonable ef-
fect tighten nut (A). This adjustment
is recommended when the brake is not
functioning satisfactorily.
8 Settings brake
Tools: 5 mm Allen key.
The braking effect is depend-
ent on the air pressure in the
tyres. The brakes are parking
brakes and should not be ap-
plied during use.
braked. Pull the handle upwards to
release the parking brake.
Tools: 8 mm spanner
12
A
B
A
A
Advertisement
Table of Contents
