General - Etac Twin Manual

The manual must be read thoroughly to avoid damage when handling and using the Twin chair.
is a warning triangle to indicate that special care should be taken.
(!)
provides advice and tips worth considering
Anti-tips are available as an accessory. At the correct setting they will prevent the wheelchair from tipping backwards.
We recommend all users to use the anti-tip devices, unless you are an experienced user with absolute control over your
wheelchair.
Twin is a manual, cross-folded, allround wheelchair with variation options that is intended for outdoor and indoor use.
The seat, backrest and footrests are adjustable in height and angle. Twin can be supplemented and adjusted if needs
change. In addition there is a range of options and accessories: Various types of legrests, seat cushions, fixing points for
transport in mobility service buses, anti-tips etc.
Twin has excellent prerequisites to create comfort, functionality and good manoeuvrability.
Crash test
Etac's wheelchairs are tested in accordance with ISO 7176-19 and ISO 10542. These ISO standards specify require-
ments for the design of the wheelchair's restraint points, how the wheelchair and the user are secured in the vehicle, and
also describe how tests should be carried out and how the test results should be interpreted. Etac's wheelchairs are crash
tested at the Technical Research Institute of Sweden. The tests were carried out with normal settings on the wheel-
chairs (see manual for the respective wheelchair) and with an UNWIN_WWR/ATF/K/R restraining device and an
UNWIN_WWR/HD/ATF/K/R 3-point belt.
The cross-folded wheelchairs Cross, Twin and Transit were supplemented with securing points.
Seat widths:
Seat depth:
Functional seat depth:
Max. user weight:
Twin is supplied with the rear wheels mounted.
Service life: The product is tested and fulfils the demands stated in EN 12183. The main product's durability and life-
time is at least five years when used in accordance with intended use, the safety instructions, the reconditioning manual
and instructions for use in the user manual. The main product consists of the chassis for seat and back support. Addi-
tional parts/accessories are handled in accordance with the manual and reconditioning manual. The actual lifetime can
vary, depending on how much and how intensively the product is being used, but a maximum of 10 years. Thereafter
the product must be decommissioned.
The following methods of surface treatment have been used:
Lacquered surfaces=Polyester powder coating
Non-lacquered aluminium parts=Anodized coating
Non-lacquered steel surfaces=Galvanized
The tool kit contains:
From 35 cm to 50 cm
42 cm
47-48 cm
125 kg
5 Allen keys: 6, 5, 5, 4 and 3 mm
3 Ring spanners: 13, 10 and 8 mm
1 Socket spanner: 24/19 mm
1 Phillips screwdriver

1 General

3