Cisco IR1101 User Manual page 9

Product Overview
• LED Indicator: provision-able, On: Active, Off: Non-active.
• Electrical isolation: 2000 VDC.
• 4kV Surge protected (IEC 61000-4-5).
IR-1100-SPMI Expansion Module LEDs
There are 6 LEDs in the Expansion Module. Four LEDs show the status of digital input and output. One LED
shows the SFP port status and one LED shows the mSATA status. The LED behavior is shown in the following
table.
Table 6: Expansion Module LEDs
LED Definition
Digital I/O as Input Off - InactiveSolid Yellow- Active
Digital I/O as Output Off - InactiveSolid Yellow- Active
SFP Off - No LinkSolid Yellow - Port link with no activityFlashing Yellow - Port link healthy with activity
mSATA Off - Not powered on or no activityFlashing Green - mSATA being accessed
Cisco IR-1100-SP Expansion Module
The IR-1100-SP Expansion Module is the same as the IR-1100-SPMI module, without the Digital I/O and
mSATA components.
The following lists the hardware platform features for the Cisco IR-1100-SP:
• 1 GE SFP (see the supported list of SFP's here:
• 1 Pluggable slot
Cisco Pluggable Module
The Pluggable Module provides the flexibility of adding different interfaces to the IR1101 platform, for
example, a cellular module.
Pluggable LTE Module
Highlights of the LTE Pluggable Module are:
• All Cellular interfaces are supported through a Pluggable Module
• Micro-Sim, 3FF size. Cisco recommends Industrial Temp micro SIMs that are rated from -40C to +105C.
The following two figures show an example of a Pluggable Module. In this case, the LTE Pluggable Module.
IR-1100-SPMI Expansion Module LEDs
SFP Module, page 26 )
Product Overview
9