Step 6 - Connect M8199A-Ilv To The M8199A Instrument - Keysight M8100A Series Getting Started Manual

2 Basic Setup for M8100A

Step 6 - Connect M8199A-ILV to the M8199A Instrument

32
To power down a chassis, first turn off the host computer and then power
NOTE
down the chassis using the On/Standby button on its front panel.
If you are using the M9537A AXIe Embedded Controller module as the
host computer, ensure that you first shut down the controller by
executing the Windows shutdown process.
Do not use the circuit breaker for routine chassis turn off.
The module(s) are turned off automatically with the chassis.
Follow the given steps to connect M8199A-ILV assembly to M8199A
instrument:
1 Remove M8199A instrument from the AXIe Chassis.
2 Place M8199A instrument and M8199A-ILV on a flat surface (for
example on a desk).
3 Move M8199A-ILV to the front panel of the M8199A instrument as in
the following figure.
Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide